FAHREN H4/9003 Bulbs, Upgraded 120W 40000LM Bright Fog Lighting Bulb, 6500K Cool White IP68 Waterproof,Quick Installation, Pack of 2

These are by far the brightest headlights i have ever owned. These LED headlights were recommended to me by a friend that works in a body shop, and said these were the lights to buy.I highly recommend these LED headlights, these are the low beam, lights. i plan to also purchase the LED lights for the high beams, from this same company. i have been looking for a good pair of LED low beam lights for a long time (many years) and this is the first pair that allows me to see the road in front of me, with ease.thank you for making these great headlights! i am very happy with my purchase!to be clear, the cutoff beam is still in the same place, meaning, the low beam light is not shining onto oncoming vehicles. it is very important to have the headlights adjusted so that the lights are not shining onto the driver, of oncoming vehicles. these lights light up the road in front of me, and are not lighting up everything the way that high beam lights do. this is of great importance. i do not know how this company achieved this, but these lights are the best i have seen thus far. I am very happy with these lights. the light is a white light, which makes it very easy for me to see the road.if my experience changes in any way, i will update this review immediately.

This is my second LED headlight bulbs set from Fahren and would highly recommend them. I really like the design as the separate bulb and drivers make them fit in easily into the original headlight buckets. They are made of good quality metal and look like they will last a long time. The kit included everything I needed to install them and took less than a half hour. The cooling fan are very quiet when operating.

Purchased these LED bulbs for my headlights on a 2016 Dodge Charger. They are pretty easy to install into the stock housing after I pulled out the stock halogens. These are very, very bright bulbs. I currently have 35% tint on my front windshield and driving at night is still super bright and easy to see with these bulbs.I did not experience any flickering, however, I actually experienced the bulbs fully cutting out 3 times for 3-5 seconds each time during a 25 minute commute home in the dark. I contacted the manufacture and Sunny from the support team was able to provide me a link to some decoders for these LEDs. After receiving the decoders the issue was completely resolved.All in all, these are very bright and work very well. Just make sure to test these out and ensure you don't get any flickering or light cutout before you take a longer drive as you may also need a decoder.

White 6500k driving low beams H11, Best bulb, worth the $56 pair they cost, nice cutoff for low beam and can see like waaay better than used halogen oem. Prius 2013

I have a 2018 Hyundai Elantra- Limited (US build) with projector headlights for the low beams. I have been trying to find a reasonably priced bulb that would actually be at least brighter than the yellow halogens. Has been tough to find and have gone through about 3 other brands already, but I researched and found out that this exact model (Termitor) from this brand (Fahren) is one of the highest rated in this price range that will produce a lot brighter and whiter light than the halogens for the projector setup. So I decided to give in and try it, before trying the next price range and throwing down a buncha money for the super expensive type (like Hikari, etc..), which I really didn’t want to do as I am hoping to get a new car in the next year or 2… So I JUST wanted to find a reasonably price bulb that produced a bright enough light to see at night in the rain!First off, the fitment is a bit ehh… one side easily fit and locked in no problem, but the other side did not… I have to pull up the fender liner to get a good grip on it to get it to correctly lock in.Although, I did absolutely very much like the fact that you can take the bulb out, loosen up the ring on the outside, and then turn the bulb if it is not in the correct 9 and 3 position.. (Idk if that was needed due to my aftermarket headlights, or the bulb itself not being in the correct position from manufacturing… probably due to the aftermarket’s, so most likely my fault not there’s…) However, I VERY much liked that they included this feature to be able to turn the bulb to get it to sit in the right position once it’s locked in. Of course, it’s a tad annoying that you have to each time pull it out, adjust, then put it back in and check, especially with the IMPOSSIBLY minuscule amount of room behind the lamps in the 2018 Elantra…But great that it’s at least included! Had other brands that did not include this feature…As far as the light and the beam pattern go… while it’s not as bright or with the perfect pattern that I was hoping for… it DEFINITELY is a very good amount more brighter than other LED bulbs I’ve tried… I tried quite a handful of other bulbs in this price range, and all were not as bright!! I was quite impressed, however, the beam pattern is not the perfect line like you see in pictures. Again, not sure if this is due to the headlamp being projectors, and just having to accept the fact that projectors will not see a crazy perfect beam pattern and crazy amount of light like can produced in the reflectors setup.. But like I said, it definitely produced a brighter light than other LED bulbs in this same price range. I just put them in a couple weeks ago and haven’t been able to use them yet in rain at night… But that will be the ultimate test. As ALLL the other led bulbs I’ve tried, DID NOT ALLOW ME TO SEE A SINGLE THING when it was dark and raining… To the fact that I tried to not drive at all if it was dark and rainy… So hopefully this light helps a lil bit with that aspect. As for now, with no rain, it’s definitely one of the better LED bulb choices for projectors!! Also very happy that I didn’t have to send back and then spend $150+ for the more expensive brands!Does have a lil bit of a noise when the lights first ramp up and turn on, but you only hear it when you first turn the car off or if you don’t turn the car on fully… Was able to fit fine inside the housing, and didnt have to get bigger housing covers. Does get VERY hot VERY quickly, but is not smashed up against the back of the housing cover, so I don’t think this will be a problem whatsoever. I worried about this a lil bit when I saw the added fat square thing a part of the cord, but it sat behind the housing perfectly without issue.OH and also, did not have to get resistors or anything of the sort, as these LEDs I believe have the canbus function already apart of it. So did NOT cause any flickering nor any warning signs on the dash!! Was just about as plug & play as it can get!Also, came with perfect instructions!!! Even has a lil tag on the cord that says if it doesn’t work, just flip the connector over and try again, which was an issue I encountered!So overall, lil bit better & brighter LED bulbs for projector setups than other LEDs I’ve tried!!

No complaints. They seem to throw a good amount of light down the road.

Super bright, lights up the night and they look good during daytime running lights. I'm gonna buy the high beams from them as well. As for reliability only time will tell.