NewentorWeather Station Wireless Indoor Outdoor, 7.5in Display Atomic Clock, Inside Outside Thermometer and Hygrometer with Weather Alert, Barometer and Weather Forecast, Time and Calendar, White

This is a really nice weather station. The viewing angle of the display allows you to read it from anywhere in the room, not just head on. The internal and external sensors give accurate readings. The Station uses an external sensor on the cord of the base unit. This means you get fast accurate readings, without having to wait for the mass of the base unit to follow the room temperature. Due to the large size of the display, it is easy to read and very colorful. I would recommend this unit.

This is exactly as it looks and works fine

The weather station looks beautiful but the setup is a little tricky.To connect your sensor successfully, you must make sure the sensor has the batteries and up running before you put batteries on the station (or plug it on electric outlet), because if you turn on the station before you turn on the sensor, the station will not connect to the sensor. You'll have to manually switch the station channels to trigger the connection.Another issue is that the brightness button is placed at a position where a human will tend to place fingers to press the buttons in the back of the station. Doing that will brightness level even if you didn't mean to change the brightness. That's a very bad design. They could've just put the button in the back just like the other buttons or put it on the right side out of the way where a hand and fingers won't naturally sit in and press the other buttons in the back. The weather station Q3 has a better design with all the buttons including the brightness button located on the right side. Unfortunately the Q7 doesn't.The sensor never lost connection(started losing connection a couple of times but not a recurrent issue) which is good but I wish it had a hole to hang or attach it which is more secured than just the back hole option for hanging it on a wall only.So far, the temperature reading are consistent always +1 degree Fahrenheit compared to my echo dot and my Google nest thermostat 4th generation. I've also tested the sensor indoor and it had the same exact temperature as the weather station itself. So, if your station or sensor has 80° F, then the real temperature is 79° F.Update(09/04/23): I found out you can turn off the auto WWVB signal search. You hold the mode button for 3secs, the daylight saving(DST) will start flashing, then press the mode button 7 times to cycle through the menu(once=set Year, 2=set Month, 3=set day, 4=set 24hr format or 12hr format, 5=set hours, 6=set minutes, 7=set WWVB, 8=exit). Once you reach the WWVB, you'll see a triangle flashing, then use the UP or DOWN button to turn on/off the WWVB.If you don't turn off the WWVB and you leave in a region where the signal cannot reach you, the weather station device will keep on turning off for 7 minutes every hour for 24 hours which totals almost 3 hours of black screen everyday.I find this device having too many black screens everyday and the problems always come from either the WWVB signal search, or the electricity going off in my area for a short time, or I accidentally touched the light dimming on top of the device(see 2nd picture above), or I accidentally pulled the electric cable and no electricity was coming to the device.So, I'll advise you to check those issues that I've mentioned in case you have similar black screens. It's also wise to put 3 AA batteries even if you're going to plug it on electricity to keep the screen ON all the time. If you don't put batteries on it and you have electric shortage in your area, the device will turn off and lose all the preset date, time zone, time...

Great weather station, good price very pleased

Love the display!

Very bight. Like how it shows humidity for inside and out

Overall a good product that does what it intends to do. I bought two of these. One for my sister and one for me. No issues with the one my sister has. I use it with constant AC power so the display stays on at all times. So far on three occasions the display goes off, black screen. You can always press the buttom on top to return the display like in battery mode but it times out even if plugged in. The only was to get it to come back on and stay on is to unplug the ac transformer from the wall and plug it back in. Unplugging hte power at the DC side does nothing. This started after the return window was over so it is a minor nuisance I have to live with. My sisters unit is used the same way and it has never happend with hers so some sort of quirk in my unit.

This is our second purchase of this weather station. The first one failed after about 2-1/2 years. We bought this one because we were happy with the first one and decided 2-1/2 years service was a decent lifetime for the price paid.